-
Deep Groove Ball Bearing Introduction Deep groove ball bearings are very widely used. A deep groove is formed on each inner and outer ring of the bearing enabling them to sustain radial and axial loads in either direction as well as the combined loads which result from the combination of these forces. Deep groove ball bearings are suitable for high speed applications. In addition to the open type, deep groove ball bearings come in a number of varieties, including pre-lubricated bearings, bear...
-
Lead Screw with Plastic Nuts Introduction And Selection Table Heat resistance: The heat resistance with a thermal deformation temperature of260 deg c can be continuously used in a high temperature environment of170-200 deg c. Drug resistance: lt is characterized by not being eroded by other acids, bases and organic solvents such as hot concentrated nitric acid. Mechanical properties: Compared with other plastics, it has excellent strength, elasticity, mechanical properties, fatigue resistance...
-
Ball Screws with Ball Spline Introduction And Selection Table Ball Spline grooves are processed on the Ball Screw Shaft, this enable to move linearly and rotationally. In addition, air suction function is available through bore hollow. Table of Shaft dia. and Lead combination for Rolled Ball Screw Lead (mm) 0.5 1 1.5 2 2.5 3 4 5 6 8 10 12 15 20 30 Shaft dia (mm) 4 5 6 ● ● ● 8 ● ...
-
Rolled Ball Screw Introduction And Selection Table KGG provide customized Rolled Ball Screws with flexible design and short delivery time. Customers can choose suitable products according to their actual situation. Table of Shaft dia. and Lead combination for Rolled Ball Screw Lead (mm) 0.5 1 1.5 2 2.5 3 4 5 6 8 10 12 15 20 30 Shaft dia (mm) 4 ● ● 5 ● 6 ● ● ● ● 8 ● ● ● ● ● ● ● 10 ● ● ● ● ● ● ● ● ● 12 ● ● 1...
-
Angular Contact Ball Bearings Introduction Standard ball bearings steel with content of carbon and chromium was selected and hardended to withstand the intense pressure between the rolling element and bearing rings. Carbonitriding on both inner and outer rings is a basic hardening process for many TPI ball bearings suppliers. Through this special heat treatment, hardness on the raceway surface is increased; which reduces wear accordingly. Ultra-clean steel is available in some of TPI standard...
-
Support Units Introduction This type of Support Unit has features of light-weight & compact profile compared to our conventional Support Units. Support Units for Ball Screws are all in stock. They fit standardized end-journal for both fixed-side and supported-side. Fixed-side Pillow type (MSU) This type of Support Unit has features of light-weight & compact profile compared to our conventional Support Units by eliminating extra shape of Housing. Pre-load controlled Angular Contact Be...
-
Rolled Ball Screw Introduction And Selection Table KGG provide customized Rolled Ball Screws with flexible design and short delivery time. Customers can choose suitable products according to their actual situation. Table of Shaft dia. and Lead combination for Rolled Ball Screw Lead (mm) 0.5 1 1.5 2 2.5 3 4 5 6 8 10 12 15 20 30 Shaft dia (mm) 4 ● ● 5 ● 6 ● ● ● ● 8 ● ● ● ● ● ● ● 10 ● ● ● ● ● ● ● ● ● 12 ● ● 1...
-
Lead Screw with Plastic Nuts Introduction And Selection Table Heat resistance: The heat resistance with a thermal deformation temperature of260 deg c can be continuously used in a high temperature environment of170-200 deg c. Drug resistance: lt is characterized by not being eroded by other acids, bases and organic solvents such as hot concentrated nitric acid. Mechanical properties: Compared with other plastics, it has excellent strength, elasticity, mechanical properties, fatigue resistance...
Welcome to the official website of Shanghai KGG Robots Co., Ltd.
Featured
-
Top
