-
Angular Contact Ball Bearings Introduction Standard ball bearings steel with content of carbon and chromium was selected and hardended to withstand the intense pressure between the rolling element and bearing rings. Carbonitriding on both inner and outer rings is a basic hardening process for many TPI ball bearings suppliers. Through this special heat treatment, hardness on the raceway surface is increased; which reduces wear accordingly. Ultra-clean steel is available in some of TPI standard...
-
Roller Column Screw VS Roller Ball Screw The bearing capacity of the rolling screw mainly depends on the radius of curvature of the contact surface between the rolling elements, the number of contact points, and the hardness and finish of the contact surface. Under the conditions of the same hardness, smoothness and precision of the contact surface, the roller screw has more contact points than the ball screw, and the radius of curvature of the enveloping circle of the roller contact sur...
-
Built-in guideway Linear Actuator Introduction The KGG Enclosed Linear Actuator has a lightweight and miniature construction that offers high performance in position accuracy and efficiency. It can be assembled and used immediately, suitable for horizontal and vertical transfer applications, and can also be grouped into multi-axis to meet the needs of customers with high precision and high load, and is widely used in the automation market. Built-in guideway Linear Actuator Details ...
-
Lead Screw with Plastic Nuts Introduction And Selection Table Heat resistance: The heat resistance with a thermal deformation temperature of260 deg c can be continuously used in a high temperature environment of170-200 deg c. Drug resistance: lt is characterized by not being eroded by other acids, bases and organic solvents such as hot concentrated nitric acid. Mechanical properties: Compared with other plastics, it has excellent strength, elasticity, mechanical properties, fatigue resis...
-
Deep Groove Ball Bearing Introduction Deep groove ball bearings are very widely used. A deep groove is formed on each inner and outer ring of the bearing enabling them to sustain radial and axial loads in either direction as well as the combined loads which result from the combination of these forces. Deep groove ball bearings are suitable for high speed applications. In addition to the open type, deep groove ball bearings come in a number of varieties, including pre-lubricated bearings, bear...
-
KGX High Rigidity Linear Actuator Details KGX series has 6 types, all of them are screw drive with high rigidity and high speed. KK Series industrial stage modularizes both ballscrew and guideway to achieve better performance on accuracy, stiffness, raipd installation, and space saving. With the block of KK driven by balls crew and sliding on the optimized U-rail, greater stiffness and high accuracy are therefore performed. Features: Easy for system design, installation and maintenance Compa...
-
Ball Screws with Ball Spline Introduction And Selection Table Ball Spline grooves are processed on the Ball Screw Shaft, this enable to move linearly and rotationally. In addition, air suction function is available through bore hollow. Table of Shaft dia. and Lead combination for Rolled Ball Screw Lead (mm) 0.5 1 1.5 2 2.5 3 4 5 6 8 10 12 15 20 30 Shaft dia (mm) 4 5 6 ● ● ● 8 ● ...
-
Ball Screws with Ball Spline Introduction And Selection Table Ball Spline grooves are processed on the Ball Screw Shaft, this enable to move linearly and rotationally. In addition, air suction function is available through bore hollow. Table of Shaft dia. and Lead combination for Rolled Ball Screw Lead (mm) 0.5 1 1.5 2 2.5 3 4 5 6 8 10 12 15 20 30 Shaft dia (mm) 4 5 6 ● ● ● 8 ● ...
Welcome to the official website of Shanghai KGG Robots Co., Ltd.
Featured
-
Top
