-
Ball Screws with Ball Spline Introduction And Selection Table Ball Spline grooves are processed on the Ball Screw Shaft, this enable to move linearly and rotationally. In addition, air suction function is available through bore hollow. Table of Shaft dia. and Lead combination for Rolled Ball Screw Lead (mm) 0.5 1 1.5 2 2.5 3 4 5 6 8 10 12 15 20 30 Shaft dia (mm) 4 5 6 ● ● ● 8 ● ...
-
Lead Screw with Plastic Nuts Introduction And Selection Table Heat resistance: The heat resistance with a thermal deformation temperature of260 deg c can be continuously used in a high temperature environment of170-200 deg c. Drug resistance: lt is characterized by not being eroded by other acids, bases and organic solvents such as hot concentrated nitric acid. Mechanical properties: Compared with other plastics, it has excellent strength, elasticity, mechanical properties, fatigue resis...
-
Roller Linear Motion Guide Details KL/KLL Four-way Equal-load Heavy-duty Wide Roller Linear Motion Guide Feature 1: The sliding rail and the sliding block are in contact with each other through balls, so the shaking is small, which is suitable for equipment with precision requirements. Feature 2: Because of the point-to-surface contact, the frictional resistance is very small, and fine movements can be performed to achieve high-precision positioning of control devices, etc. ZL/ZLL Four-wa...
-
Roller Linear Motion Guide Details KL/KLL Four-way Equal-load Heavy-duty Wide Roller Linear Motion Guide Feature 1: The sliding rail and the sliding block are in contact with each other through balls, so the shaking is small, which is suitable for equipment with precision requirements. Feature 2: Because of the point-to-surface contact, the frictional resistance is very small, and fine movements can be performed to achieve high-precision positioning of control devices, etc. ZL/ZLL Four-wa...
-
Angular Contact Ball Bearings Introduction Standard ball bearings steel with content of carbon and chromium was selected and hardended to withstand the intense pressure between the rolling element and bearing rings. Carbonitriding on both inner and outer rings is a basic hardening process for many TPI ball bearings suppliers. Through this special heat treatment, hardness on the raceway surface is increased; which reduces wear accordingly. Ultra-clean steel is available in some of TPI standard...
-
KGX High Rigidity Linear Actuator Details KGX series has 6 types, all of them are screw drive with high rigidity and high speed. KK Series industrial stage modularizes both ballscrew and guideway to achieve better performance on accuracy, stiffness, raipd installation, and space saving. With the block of KK driven by balls crew and sliding on the optimized U-rail, greater stiffness and high accuracy are therefore performed. Features: Easy for system design, installation and maintenance Compa...
-
Rolled Ball Screw Introduction And Selection Table KGG provide customized Rolled Ball Screws with flexible design and short delivery time. Customers can choose suitable products according to their actual situation. Table of Shaft dia. and Lead combination for Rolled Ball Screw Lead (mm) 0.5 1 1.5 2 2.5 3 4 5 6 8 10 12 15 20 30 Shaft dia (mm) 4 ● ● 5 ● 6 ● ● ● ● 8 ● ● ● ● ● ● ● ...
-
Roller Column Screw VS Roller Ball Screw The bearing capacity of the rolling screw mainly depends on the radius of curvature of the contact surface between the rolling elements, the number of contact points, and the hardness and finish of the contact surface. Under the conditions of the same hardness, smoothness and precision of the contact surface, the roller screw has more contact points than the ball screw, and the radius of curvature of the enveloping circle of the roller contact sur...
Welcome to the official website of Shanghai KGG Robots Co., Ltd.
Featured
-
Top
