Accuracy grade of TXR series(sleeve type single nut ball screw)are based on C5,Ct7 and Ct10(JIS B 1192-3). According to accuracy grade, Axial play 0.005(Preload :C5),0.02(Ct7) and 0.05mm or less(Ct10).
TXR series (sleeve type single nut ball screw) of screw shaft screw material S55C (induction hardening), nut material SCM415H (carburizing and hardening), the surface hardness of the ball screw part is HRC58 or higher.
The shape of the shaft end of the TXR series (sleeve type single nut ball screws) has been standardized.And has been kept delivered in time all the year round. Screw rod and nut can be ordered separately.
Ball | Lead Angle | Number of circuit | Surface hardness | Material | Travel | Grade | Shaft | Lead accuracy | Total | Axial | Basic Load Rating | PDF Download | 3D CAD | ||||
length (L1) | Run-out | play | (N) | ||||||||||||||
Diameter | BCD | Shaft | Nut | Travel deviation (ep) | Variation(V300) | Dynamic | Static | ||||||||||
(Ca) | (Coa) | ||||||||||||||||
Φ0.8 | 4.15 | 4°23‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 585 | C5 | 600 | ±0.030 | 0.018 | 0.09 | ~0.005 | 560 | 790 | * | * |
Ct7 | ±0.104 | 0.052 | 0.15 | ~0.020 | * | ||||||||||||
Ct10 | ±0.420 | 0.21 | 0.35 | ~0.050 | * | ||||||||||||
Φ0.8 | 4.15 | 8°43‘ | 2.7×1 | HRC58~62 | S55C | SCM415H | 580 | C5 | 600 | ±0.030 | 0.018 | 0.09 | ~0.005 | * | * | ||
Ct7 | ±0.104 | 0.052 | 0.15 | ~0.020 | 420 | 570 | * | ||||||||||
Ct10 | ±0.420 | 0.21 | 0.35 | ~0.050 | * | ||||||||||||
Φ0.8 | 5.15 | 13°53‘ | 2.7×1 | HRC58~62 | S55C | SCM415H | 575 | C5 | 600 | ±0.030 | 0.018 | 0.09 | ~0.005 | * | * | ||
Ct7 | ±0.104 | 0.052 | 0.15 | ~0.020 | 470 | 720 | * | ||||||||||
Ct10 | ±0.470 | 0.21 | 0.35 | ~0.050 | * | ||||||||||||
Φ0.8 | 6.15 | 2°58‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 585 | C5 | 600 | ±0.030 | 0.018 | 0.09 | ~0.005 | * | * | ||
Ct7 | ±0.104 | 0.052 | 0.15 | ~0.020 | 680 | 1200 | * | ||||||||||
Ct10 | ±0.680 | 0.21 | 0.35 | ~0.050 | * | ||||||||||||
Φ1.0 | 6.2 | 5°52‘ | 2.7×1 | HRC58~62 | S55C | SCM415H | 585 | C5 | 600 | ±0.030 | 0.018 | 0.09 | ~0.005 | * | * | ||
Ct7 | ±0.104 | 0.052 | 0.15 | ~0.020 | 680 | 1200 | * | ||||||||||
Ct10 | ±0.680 | 0.21 | 0.35 | ~0.050 | * | ||||||||||||
Φ0.8 | 8.15 | 2°15‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 1185 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 780 | 1650 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ1.5875 | 8.3 | 2°15‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 1180 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 2400 | 4100 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ1.5875 | 8 | 4°23‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 1180 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 1850 | 3000 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ1.5875 | 8.3 | 10°51‘ | 2.7×1 | HRC58~62 | S55C | SCM415H | 1170 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 1850 | 3000 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ1.5875 | 10.3 | 3°32‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 1180 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 2700 | 5300 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ2.0 | 10.3 | 5°18‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 1170 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 3900 | 7200 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ2.0 | 10.3 | 7°03‘ | 2.7×1 | HRC58~62 | S55C | SCM415H | 1170 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 3000 | 5200 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ2.0 | 10.3 | 8°47‘ | 2.7×1 | HRC58~62 | S55C | SCM415H | 1170 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 3000 | 5200 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ2.0 | 10.3 | 10°03‘ | 2.7×1 | HRC58~62 | S55C | SCM415H | 1170 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 3000 | 5000 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ1.5875 | 12.3 | 2°58‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 1180 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 3000 | 6400 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ1.5875 | 14.3 | 2°33‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 1180 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 960 | 2900 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * | ||||||||||||
Φ2.381 | 14.3 | 5°05‘ | 3.7×1 | HRC58~62 | S55C | SCM415H | 1170 | C5 | 1200 | ±0.046 | 0.018 | 0.15 | ~0.005 | * | * | ||
Ct7 | ±0.208 | 0.052 | 0.32 | ~0.020 | 5700 | 11600 | * | ||||||||||
Ct10 | ±0.840 | 0.21 | 0.64 | ~0.050 | * |
Please send us your message. We will get back to you within one working day.
All fields marked with * are mandatory.